ASM Webinar On-Demand Library
2026 Webinars
Failure Analysis Insights from IMAT 2025: Environmental Stress Cracking & Elastomeric Gasket Failures
Presented by FAS, the Failure Analysis Society • 3/11/2026
VIEW THE WEBINAR
Using Machine Learning to Better Understand Strength and Durability in Nickel Superalloys
Sponsored by QuesTek • 3/5/2026
VIEW THE WEBINAR
TSS Open Mic with Marcel Van Wonderen, KLM, Holland
Presented by TSS, the Thermal Spray Society • 3/4/2026
VIEW THE WEBINAR
Archaeometallurgical and Heritage Study and Preservation of a Historic Iron Bridge over the Mendoza River
Presented by the ASM Archaeometallurgical Committee • 2/25/2026
VIEW THE WEBINAR
Graph-Based Design of Compositionally Graded Alloys in ICMD®
Sponsored by QuesTek • 2/12/2026
VIEW THE WEBINAR
TSS Open Mic with Leo Ajdelsztajn, Solvus Global
Presented by TSS, the Thermal Spray Society • 1/21/2026
VIEW THE WEBINAR
2025 Webinars
From Silicon to System: A Journey in Fault Isolation
Presented by EDFAS, the Electronic Device Failure Analysis Society• 12/18/2025
VIEW THE WEBINAR
Innovative Research in Foundry Engineering at the Faculty of Mechanical and Industrial Engineering, Warsaw U. of Technology
Presented by IMS, the International Metallographic Society• 12/3/2025
VIEW THE WEBINAR
Advancing Clad Metals: From Traditional Cold Cladding to Next-Generation ARB Processing
Sponsored by Materion • 11/20/2025
VIEW THE WEBINAR
TSS Open Mic Series – Artificial Intelligence (AI) + Industry 5.0 in Thermal Spray – Panel Discussion
Presented by TSS, The Thermal Spray Society • 11/19/2025
VIEW THE WEBINAR
Shape Memory Alloy Yarns and Textiles
Presented by SMST, The International Organization on Shape Memory and Superelastic Technologies • 11/13/2025
VIEW THE WEBINAR
Hamamatsu Releases New Optical Capabilities Targeting Next Gen, AI, and Hyperscaler IC Failure Analysis
Sponsored by Hamamatsu • 11/6/2025
The recording for this session is unavailable. We invite you to contact Hamamatsu for more information
Advanced Averaging Transverse Strain Measurement for Automotive Sheet Metal
Sponsored by Instron • 11/5/2025
VIEW THE WEBINAR
Advanced Material Solutions that Enable Innovative Hydrogen Technologies
Sponsored by Materion • 10/30/2025
VIEW THE WEBINAR
Using ICMD® to support solidification processes – from casting to additive manufacturing
Sponsored by QuesTek • 10/14/2025
VIEW THE WEBINAR
Applications of Heat Treatment Processes: How Gases and Technologies Play a Key Role in Transportation, Aerospace and Defense
Sponsored by Linde and Nitrex • 10/2/2025
VIEW THE WEBINAR
From Design to Delivery: Understanding Failure Analysis in Medical Devices
Sponsored by Materion • 9/30/2025
VIEW THE WEBINAR
From Design to Delivery: Understanding Failure Analysis in Medical Devices
Presented by FAS, the Failure Analysis Society • 9/29/2025
VIEW THE WEBINAR
Democratizing Advanced FIB-SEM Workflows: AI-Driven TEM Sample Preparation and Cross Sectioning
Sponsored by Tescan • 9/25/2025 SESSION 2
PLEASE NOTE: This webinar was presented twice. The talk presentation is the same in both — only the Q&A session (final 20 minutes) differs
VIEW THE WEBINAR
Democratizing Advanced FIB-SEM Workflows: AI-Driven TEM Sample Preparation and Cross Sectioning
Sponsored by Tescan • 9/25/2025 SESSION 1
PLEASE NOTE: This webinar was presented twice. The talk presentation is the same in both — only the Q&A session (final 20 minutes) differs
VIEW THE WEBINAR
TSS Open Mic Series – Nelso Antolotti, Lincotek
Presented by TSS, the Thermal Spray Society • 9/24/2025
VIEW THE WEBINAR
Using ICMD® to design printable, burn resistant superalloys – enabling re-usable rockets for the space industry
Sponsored by QuesTek• 9/23/2025
VIEW THE WEBINAR
Got Residual Stress? What Should You Do?
Presented by the ASM Residual Stress Technical Committee • 9/22/2025
VIEW THE WEBINAR
An Introduction to Thermal Analysis
Sponsored by Hitachi High-Tech America • 9/18/2025
VIEW THE WEBINAR
Exploring the World, Exploring Matter: My Journey with Focused Ion Beams
Presented by EDFAS, the Electronic Device Failure Analysis Society • 9/2/2025
VIEW THE WEBINAR
Accelerate Materials Simulation with Machine Learning in ICMD®
Sponsored by QuesTek • 8/26/2025
VIEW THE WEBINAR
Elastocalorics – tomorrow’s cooling systems based on SMA
Presented by SMST, The International Organization on Shape Memory and Superelastic Technologies • 8/21/2025
VIEW THE WEBINAR
Unlocking the Secrets of Induction Coil Theory & Design
Presented by HTS, the Heat Treating Society • 8/5/2025
VIEW THE WEBINAR
Testing and Analysis on the Dynamic Loosening of Jack Bolt Nuts Compared with Heavy Hex Nuts
Presented by FAS, the Failure Analysis Society • 8/12/2025
VIEW THE WEBINAR
Unlocking the Secrets of Induction Coil Theory & Design
Presented by HTS, the Heat Treating Society • 8/5/2025
VIEW THE WEBINAR
Air Fingers and Cavitation – Analysis of Wood Bonding Failures that Initiated Before Adhesive Solidification
Presented by FAS, the Failure Analysis Society • 7/16/2025
VIEW THE WEBINAR
Understanding Wear Testing – Fundamentals, Practices, and a Bronze Alloy Case Study
Sponsored by Materion • 6/26/2025
VIEW THE WEBINAR
Corrosion Morphology in Archaeological Copper Alloys: A Microanalytical Approach
Presented by The ASM Archaeometallurgy Committee • 6/24/2025
VIEW THE WEBINAR
Future-Ready Lightweight Materials: Key Solutions for Tomorrow’s Engineering Designs
Sponsored by Materion • 5/22/2025
VIEW THE WEBINAR
Collaboration and Growth: Lessons from a 25-Year Career at Micron
Presented by EDFAS, The Electronic Device Failure Analysis Society • 5/21/2025
VIEW THE WEBINAR
The Evolution of FIB Nanotechnologies and Contactless Probe: Advancing Silicon Debug & Failure Analysis into the Angstrom Era
Presented by EDFAS, The Electronic Device Failure Analysis Society • 4/22/2025
VIEW THE WEBINAR
Ion Beam Delayering for Today’s More Complex Semiconductors
Sponsored by Denton Vacuum • 5/6/2025
VIEW THE WEBINAR
The Evolution of FIB Nanotechnologies and Contactless Probe: Advancing Silicon Debug & Failure Analysis into the Angstrom Era
Presented by EDFAS, The Electronic Device Failure Analysis Society • 4/22/2025
VIEW THE WEBINAR
Shape Memory Alloys State of the Art: Design with the Hottest Buzzwords – Machine Learning and Additive Manufacturing
Presented by SMST, Shape Memory and Superelastic Technologies • 4/16/2025
VIEW THE WEBINAR
Scan diagnosis – an essential component for yield and failure analysis
Sponsored by SIEMENS • 4/10/2025
VIEW THE WEBINAR
Pedagogy for Failure Analysis of Materials: Class Organization and Student Projects Examples
Presented by FAS, The Failure Analysis Society • 4/8/2025
VIEW THE WEBINAR
From Astronomer to Entrepreneur, the Story of MuAnalysis
Presented by EDFAS, The Electronic Device Failure Analysis Society • 3/28/2025
VIEW THE WEBINAR
Unlocking the Potential of Tantalum and Niobium: Essential Refractory Metals for Advanced Technologies
Sponsored by: Materion • 3/26/2025
VIEW THE WEBINAR
On the latest 3D X-ray Microscopy and Electron Microscopy to propel your Superalloy research
Sponsored by: Zeiss • 3/25/2025
VIEW THE WEBINAR
From R&D to Manufacturing: How Cal Nano is Shaping the Future of Materials with Spark Plasma Sintering and Cryogenic Milling
Presented by: California Nanotechnologies • 3/20/2025
VIEW THE WEBINAR
Struers’ Best Practices: Lean Tools in the Materialographic Laboratory
Presented by: Struers • 3/19/2025
VIEW THE WEBINAR
Critical Dimension Analysis Made Smarter: Automated Solutions for Semiconductors, Welds, Layers, and Beyond
Presented by: MIPAR Image Analysis • 2/27/2025
VIEW THE WEBINAR
Alloy Design for Additive Manufacturing using ICMD®
Presented by: Questek • 2/13/2025
VIEW THE WEBINAR
Shape Memory Alloys State of the Art: Kickoff + Nitinol for Medical Devices
Presented by: SMST, Shape Memory and Superelastic Technologies • 2/12/2025
VIEW THE WEBINAR
Exploring Material Failures: Academic Insights and Practical Applications
Presented by: FAS, the Failure Analysis Society • 2/6/2025
VIEW THE WEBINAR
Successfully Implementing an Internal Materials Management Platform
Presented by: Total Materia • 2/5/2025
VIEW THE WEBINAR
Functionally Graded Materials and Material Compatibility in ICMD®
Presented by: QuesTek • 1/23/2025
VIEW THE WEBINAR
2024 Webinars
2025 Webinars
Maximizing Small Diameter Inductive Tube Welding System Performance
Presented by: The Heat Treating Society • 12/19/24
VIEW THE WEBINAR
Driving Materials Innovation Through Collaborative Excellence with ICMD®
Presented by: QuesTek • 10/24/24
VIEW THE WEBINAR
Specialized Advanced Materials Enabling the Development of New Aerospace Technologies
Presented by: Materion • 10/23/24
VIEW THE WEBINAR
FIB-SEM Microscopy Introduction to Semicon FA and R&D
Presented by: TESCAN • 10/21/24
VIEW THE WEBINAR
Next-Gen Image Analysis in Microscopy: Integrating Zero-Shot, Deep Learning, and Conventional Processing
Presented by: MIPAR • 10/17/24
VIEW THE WEBINAR
Designing Sustainable Alloys Using ICMD® – Alloy Composition Design
Presented by: QuesTek • 9/26/24
VIEW THE WEBINAR
Navigating Three Decades of IC Materials and Failure Analysis: What I Learned
Presented by: EDFAS • 9/24/24
VIEW THE WEBINAR
Specialty Alloys and Composites for Advanced Hybrid and Electric Vehicle Applications
Presented by: Materion • 9/18/24
VIEW THE WEBINAR
Designing Sustainable Alloys Using ICMD® – Model Workflow and Calibration
Presented by: QuesTek Innovations • 9/12/24
VIEW THE WEBINAR
Designing Sustainable Alloys Using ICMD® – Systems Design and Concept
Presented by: QuesTek Innovations • 8/29/24
VIEW THE WEBINAR
Residual Stress and Phase Transformation Predictions in Carburized AISI 9310 Steel – Calibrating FEA models through Experiment
Presented by: The Heat Treating Society • 8/6/24
VIEW THE WEBINAR
Calculating the Carbon Footprint for Materials: The Journey to Net Zero with ASM and Total Materia
Presented by: ASM and Total Materia • 7/30/24
VIEW THE WEBINAR
Advanced Materials for Improved Thermal Management and Hermetic Sealing Techniques
in Semiconductor, Computing, and AI
Sponsored by: Materion • 7/23/24
VIEW THE WEBINAR
Challenges of Elevated Temperature Tensile Testing for Aerospace Metals
Sponsored by: Instron • 7/18/24
Hardness Testing as a Quality Control Tool in Heat Treatment and Welding
Sponsored by: Struers • 7/16/24
Industrial Failure Analysis
Presented by: The Failure Analysis Society • 6/20/24
Additive Manufacturing
Sponsored by: American Elements • Presented by: ASM and MRS • 6/12/24
Non-destructive phase classification of materials in 3D: Battery black mass, pharmaceutical materials and concrete
Sponsored by: ZEISS • 5/29/24
Entrepreneurship and Developing Thermal Spray Technology
Sponsored by: Polycontrols and Saint-Gobain • 3/20/24
A TSS Open Mic Series Event
Advanced Packaging Options and the Role of Chiplets
An Electronic Device Failure Analysis Society (EDFAS) event • 3/14/24
Navigating Tomorrow: Insights from Emerging Trailblazers in Thermal Spray
Sponsored by: Polycontrols and Saint-Gobain • 2/21/24
A TSS Open Mic Series Event
My Career Journey from Supplier to End-User in Thermal Spray Technology – Dr. Ann Bolcavage, Rolls Royce
Sponsored by: Polycontrols and Saint-Gobain • 1/17/24
2023 Webinars
Mr. Toad’s Wild Ride – Blending Materials Science, Microelectronics, IP Protection and Entrepreneurship at NanoSpective
Presented by: EDFAS • 12/13/23
Ensuring product Quality with Thermal Analysis
Sponsored by: Hitachi High-Tech America • 12/13/23
Engineering Materials for the Future, The Integrated Computational Materials (ICME) Advantage: Designing materials using ICMD®
Sponsored by: QuesTek • 12/5/23
Engineering Materials for the Future, The Integrated Computational Materials (ICME) Advantage: Physics-based modeling & machine learning to solve materials challenges
Sponsored by: QuesTek • 11/16/23
How NOT to Become a Thermal Spray Consultant
Sponsored by: Polycontrols • 11/15/23
Materialographic Preparation and Evaluation of Microelectronic Devices
Sponsored by: Struers • 11/14/23
Engineering Materials for the Future, The Integrated Computational Materials (ICME) Advantage: High and low cycle fatigue
Sponsored by: QuesTek • 11/9/23
Engineering Materials for the Future, The Integrated Computational Materials (ICME) Advantage: Rapid additive manufacturing parameter set development
Sponsored by: QuesTek • 10/5/23
Engineering Materials for the Future, The Integrated Computational Materials (ICME) Advantage: Accelerated qualification and certification of materials with ICMD® design software
Sponsored by: QuesTek • 9/28/23
Engineering Materials for the Future, The Integrated Computational Materials (ICME) Advantage: Alloy composition and processing optimization with ICME
Sponsored by: QuesTek • 9/13/23
Innovative Clad Metal Solutions to Address Technical Challenges in Next-Generation Battery Applications
Sponsored by: Materion • 9/12/23
Engineering Materials for the Future, The Integrated Computational Materials (ICME) Advantage: Utilizing ICME to overcome materials challenges and accelerate alloy development
Sponsored by: QuesTek • 8/31/23
Influence of Hydrogen on the Properties of High-Strength Copper Alloys
Sponsored by: Materion • 8/17/23
Aluminum-Silicon Controlled Expansion Alloys for Thermal Management in Structural and Optical Applications
Sponsored by: Materion • 7/20/23
Solving Barriers to High Performance and Novel Materials Adoption
Sponsored by: SMST • 7/12/23
How to Meet Compliance and Sustainability Requirements for Materials
Sponsored by: ASM Data Ecosystem • 6/29/23
Learn More About 3D Packaging Architecture with Dr. Yan Li
Sponsored by: EDFAS • 6/23/23
Pride in Materials – A Panel Discussion
Sponsored by: ASM International and TMS • 6/21/23
Microscopy for Materials Research Series – Computational Microscopy
Sponsored by: ZEISS • 6/20/23
Microscopy for Materials Research Series – Advanced Steel Microscopy
Sponsored by: ZEISS • 5/16/23
Microscopy for Materials Research Series – Concrete
Sponsored by: ZEISS • 5/4/23
Navigating Mammoth Challenges to Transform Novel Materials to Large Scale Production
Sponsored by: SMST • 4/12/23
Microscopy for Materials Research Series – Energy Materials
Sponsored by: ZEISS • 4/6/23
Scanning Microwave Impedance Microscopy (sMIM) with Nicholas Antoniou
Sponsored by: EDFAS • 3/28/23
Struers’ Best Practices: Organization and Cleaning in the Materialographic Laboratory
Sponsored by: Struers • 3/28/23
Using Multimodal Microscopy to Understand Coatings and Surface Layers
Sponsored by: ZEISS • 3/7/23
Why choose spark OES for metal additive manufacturing?
Sponsored by: Hitachi High-Tech • 3/2/23
Microscopy Solutions for Ceramics
Sponsored by: ZEISS • 1/25/23
An Introduction to TESCAN TENSOR, the world’s first fully Integrated Analytical 4D-STEM
Sponsored by: TESCAN • 1/18/23
Career Opportunities in Shape Memory and Superelastic Technologies with Dr. Ashley Bucsek
Sponsored by: SMST • 1/17/23
2022 Webinars
Unlocking Crystallographic & Microstructural Secrets of Your Materials
Sponsored by: ZEISS • 12/13/22
Linking Structure and Catalytic Properties of Heterogeneous and Automotive Catalysts for Environmental Applications
Sponsored by: ZEISS • 11/29/22
The Future of Transport: Grasping New Opportunities in Heat Treating
Sponsored by: Linde & Nitrex • 11/17/22
High Volume and Highly Automated Sample Preparation
Sponsored by: Struers • 11/16/22
Development and Innovations in Non-Ferrous Metals and Alloys: Nickel
Joint Webinar Hosted by: ASM International and IOM3 • 11/15/22
How to Easily Prepare Micro Targets for Electron Microscopy Analysis
Sponsored by: Leica • 11/8/22
Hardness Testing for Heat Treaters
Sponsored by: Struers • 06/29/22
Enhance your Understanding of Composite Materials with Thermal Analysis
Sponsored by: Hitachi High-Tech • 06/29/22
Innovations and New Applications for Non-Ferrous Alloys Part 1: Aluminum
Co-Hosted by: ASM/IOM3 • 06/21/22
Managing your Business with Data Management
Sponsored by: ASM International • 06/23/22
The Use of EDS for QA and FA within Production Processes
Sponsored by: Oxford Instruments • 06/09/22
High Entropy Alloys
Jointly Sponsored by: ASM International • MRS • 06/01/22
Solidification Modelling With CALPHAD: Process Applications of Equilibrium and Non-equilibrium Models and When to Use Them
Sponsored by: Thermo-Calc Software • Presented by: Adam Hope • 05/12/22
Microstructure of Thermoplastic Compsite Materials
Sponsored by: Struers • Presented by: Ellis Perry • 04/26/22
Cultivating Your Executive Presence
Sponsored by: telos • Presented by: Bob Schultek and Mike Herzog • 03/30/22
Enhancing Materials Performance for Industry 4.0
Sponsored by: ASM International • 03/29/22
Adventures with Materials in Industry and Academia
Sponsored by: IMS • Presented by: Dr. Abdallah Elsayed• 03/23/22
Solving Stainless Steel Materials Challenges with CALPHAD-based Tools
Sponsored by: Thermo-Calc Software Inc. • Presented by: Ben Sutton • 03/08/22
Novel Electron Detection and Imaging Strategies in the SEM for
Enhanced Quantification of Second Phases
Sponsored by: Thermo Fisher Scientific • Presented by: Dr. Hamish Fraser and Brandon Van Leer • 1/11/22
2021 Webinars
Polarized Light and Differential Interference Contrast in Metallography
Sponsored by: Leica Microsystems • Presented by: Sonika Gahlawat • 12/16/21
Solving Corrosion Challenges with Integrated Computational Materials Modeling
Sponsored by: Thermo-Calc Software Inc. • Presented by: Jim Rule • 12/09/21
Best Practices for Control of the Melting Process in Foundries
Sponsored by: Hitachi • Presented by: Michael Molderings • 12/01/21
Advanced Characterization of Steels at the Nano and Microscale
Sponsored by: Thermo Fisher Scientific • Presented by: Hui (Maggie) Shi, Mélanie Gauvin, and Davit Melkonyan 11/16/21
Using Clad Metal Innovations for Battery, Charging, and Thermal Management Challenges in Electric Vehicles
Sponsored by: Materion • Presented by: Sejin Im 11/11/21
Neurodiversity and Disability Inclusion in the Workplace
Sponsored by: ASM IDEA Committee • Presented by: Gee Abraham 11/10/21
Measuring Residual Stress via X-ray Diffraction – Applications in Metal Additive Manufacturing
Sponsored by: Stresstech • Presented by: James Thomas and Wade Gubbels 10/27/21
From Graduate Studies in Metallurgy to Forensics Engineering
Sponsored by: IMS • Presented by: Dr. Eli Vandersluis 10/27/21
TSS Open Mic Series: Thermal Spray – A Remarkably Versatile Technology with Many Career Opportunities
Sponsored by: TSS • Presented by: Dr. Mark F. Smith, FASM, TSS HoF 10/20/21
The Influence of Bearing Material Properties on the Optimum Design of Heavily Loaded Bearings
Sponsored by: Materion • Presented by: Dave Krus 10/6/21
A Novel Reversible Scan Chain Technology that Improves Chain Diagnosis Resolution by 4X
Sponsored by: Siemens and Qualcomm Technologies • Presented by: Jayant D’Souza, Szczepan Urban, and Kun Young Chung 9/23/21
Engineering Consulting with a Renowned Physical Metallurgist
Sponsored by: IMS • Presented by: George F. Vander Voort, FASM 9/22/21
Hardness Testing: Sample Preparation and Other Parameters That Influence Results
Sponsored by: Struers • Presented by: Brian Jones 8/24/21
Life as a Graduate Student in Metallurgy
Sponsored by: IMS • Presented by: Bernoulli Andilab 8/18/21
Sustainable Materials for Electric Vehicles
Sponsored by: Linde & UPC Marathon • Presented by: ASM and MRS 8/04/21
TSS Open Mic Series: Industry Panel Session
Sponsored by: TSS • Presented by: Mr. Charles Kay, FASM, Vice-President, ASB Industries, US and Mr. William Lenling, FASM, Co-Founder and CTO TST Engineered Coatings, US & President, ASM Thermal Spray Society 6/30/21
3D Imaging of Lithium-Ion Batteries
Sponsored by: ThermoFisher Scientific • Presented by: Udo de Vries and Herma Lemmens 6/23/21
Characterization of Multilayer Coatings: Composition and Thickness using Multiple Techniques
Sponsored by: HORIBA Scientific • Presented by: Philippe Hunault and Kayvon Savadkouei 6/22/21
TSS Open Mic Series: Microstructural Flexibility of Thermally Sprayed Ceramic Coatings
Sponsored by: TSS • Presented by: Dr. Robert Vassen, FASM 6/19/21
TSS Open Mic Series: A Few Simple Rules for Structuring Scientific Papers
Sponsored by: TSS • Presented by: Dr. Armelle Vardelle, FASM, TSS HoF, Editor-in-Chief, Journal of Thermal Spray Technology 5/19/21
Exploring the Future of the Transportation Industry: From Electric Vehicles to Automated Controls
Sponsored by: Linde & UPC-Marathon • Presented by: Steve Mueller and Eric Jossart 5/13/21
Elevate your Inspection Workflow: Digital, Consistent, and Traceable
Sponsored by: Leica Microsystems • Presented by: Nick Baker 5/4/21
The Path to Materials Evaluation and Engineering, Inc.
Sponsored by: IMS • Presented by: Larry Hanke, P.E., FASM ; 04/28/21
How Effective is 2D DIC in Materials Testing?
Sponsored by: Zwick/Roell • Presented by: Fadi Abu-Farha 4/27/21
TSS Open Mic Series: Cold Spray: The Journey Began Around 25 Years Ago, Where Are We Now?
Sponsored by: TSS • Presented by: Rocco Lupoi 4/21/21
New Features for Improved Performance of Instrumental Gas Analyzers
Sponsored by: HORIBA Scientific • Presented by: Matthieu Chausseau 4/20/21
Material Solutions to Meet the Requirements of Electrical and Electronic Connectors
Sponsored by: Materion • Presented by: Mike Gedeon 4/15/21
The Business and Scientific Value of Artificial Intelligence in R&D of New Materials
Sponsored by: Citrine Informatics • Presented by: Raphael Stargrove 4/08/21
How to Easily Prepare Micro Targets for Electron Microscopy Analysis
Sponsored by: Leica Microsystems • Presented by: Andrew Lawson 4/06/21
Recent Advances in Automated Scanning Electron Microscopy (CCSEM) and its Application to Study Steel Inclusion Content
Sponsored by: TESCAN • Presented by: Scott Story, Gary S. Casuccio, and Jack Mershon 3/31/21
A Novel SEM-EDS Approach for Materials Failure Analysis
Sponsored by: Thermo Fisher Scientific • Presented by: Roger Maddalena and Alice Scarpellini 3/30/21
Automatic Sample Preparation of Stainless Steels for Microstructural Analysis
Sponsored by: Struers, Inc.• Presented by: Kelsey Torboli 3/25/21
TSS Open Mic Series: From Brazil to Stony Brook (USA) and then NRC (Canada): Professional Life Lessons in Thermal Spraying
Sponsored by: TSS • Presented by: Dr. Rogerio Lima 3/17/21
Using Diffraction-contrast Electron Microscopy to Elucidate Dislocation Pathways in Refractory Multi-principal Element Alloys
Sponsored by: Thermo Fisher Scientific • Presented by: Dr. Fulin Wang and Prof. Daniel S. Gianola 3/11/21
Building a Support Network from the Ground Up
Sponsored by: IDEA Committee • Presented by: Vanessa Raquel Raponi 2/25/21
A Career Development Strategy
Sponsored by: IMS • Presented by: Dr. Daniel P. Dennies, FASM 02/25/21
Breakthrough of a New Thermal Spray Technology: Quo Vadis Suspension Spraying?
Sponsored by: TSS • Presented by: Dr. Filofteia-Laura Toma 2/17/21
High Volume and Highly Automated Sample Preparation
Sponsored by: Struers, Inc. • Presented by: Kelsey Torboli 1/26/21
Five Expert Tips for Optimal Nonferrous Melt Control with Spark OES
Sponsored by: Hitachi • Presented by: Jochen Meurs 1/21/21
TSS Open Mic Series: Industrial Gas Turbine (IGT) and Thermal Spray Technology—A Personal Perspective
Sponsored by: TSS • Presented by: Dr. Yuk-Chiu Lau, ASM TSS Hall of Fame Inductee 1/20/21
2020 Webinars
TSS Open Mic Series Session 2
Sponsored by: TSS • Presented by: Dr. Sanjay Sampath, FASM 12/16/20
Materials Selection and Design Considerations for Heavily Loaded Bearings
Sponsored by: Materion • Presented by: Dave Krus 12/16/20
Metallography of Alloy Biomaterial Hip Implants
Sponsored by: Struers Inc. • Presented by: Kelsey Torboli 12/15/20
Electron Microscopy Solutions for Metal Additive Manufacturing Qualification
Sponsored by: Thermo Fisher Scientific • Presented by: Mark Aindow and Rainer Hebert 12/03/20
Preparing an Effective ASM Award Nomination
Sponsored by: ASM Awards Committee • Presented by: Christine Hoover, Tim Rupert & Elizabeth Hoffman 12/01/20
Learning from Experience so that Bumps in the Road can be Navigated
Sponsored by: TSS • Presented by: Dr. Christopher Berndt, FASM 11/18/20
Unraveling the Morphology and Elemental Distribution of Nanoporous Refractory Metals via TEM Tomography
Sponsored by: Thermo Fisher Scientifc • Presented by: Maria Kosmidou 11/19/20
How to Create a Welcoming Technical Workspace: Stories and Personal Experiences
Sponsored by: ASM IDEA Committee • Presented by: Dr. Danielle Cote 11/12/20
ASM World Class Speaker Series Matilda McAleenan of McLaren Racing
Sponsored by: ASM Ontario Chapter • Presented by: Matilda McAleenan 10/26/20
Novel Applications of Advanced Electron Microscopy Techniques in Materials Failure Analysis
Sponsored by: Thermo Fisher Scientific • Presented by: Philip Withers and Ali Gholina 09/29/20
Digital Image Correlation in Support of Complex Testing of Advanced Materials
Sponsored by: Zwick/Roell • Presented by: Fadi Abu-Farha 09/30/20
Novel Applications of Advanced Electron Microscopy Techniques in Materials Failure Analysis
Sponsored by: Thermo Fisher Scientific • Presented by: Philip Withers and Ali Gholina 09/29/20
ASM Materials Platform for Data Science – Success Stories: High Temperature Oxidation – Inconel 625
Sponsored by: ASM International • Presented by: Ray Fryan 09/28/20
Isotropic Aluminum Composites for High Stability & Lightweight Applications
Sponsored by: Materion • Presented by: Andrew Tarrant 09/24/20
Materialography as a Quality Control Tool
Sponsored by: Struers Inc. • Presented by: James Silvester 09/22/20
Nodular, Grey and CGI Iron: An Image Analysis Perspective
Sponsored by: Clemex • Presented by: Marc Lavallee 08/27/20
Getting a Seat at the Table as a Materials Researcher: Tips on How to become a Science & Technology Policy Fellow
Presented by: AAAS • Dr. Elizabeth Boatman, Dr. Ticora Jones, Dr. Marcius Extavour 08/13/20
Thermal-Structural Materials Solutions for Heat Management in Electronic Device
Sponsored by: Materion • Presented by: Anand Samant 08/06/20
Coatings: An Image Analysis Perspective
Sponsored by: Clemex • Presented by: Marc Lavelle on 07/30/20
Fractography and Fracture Analysis: History and Development
Sponsored by: ASM International • Presented by: Larry Hanke and Daniel Grice on 07/28/20
Material Considerations for Electrical Contacts in High Reliability Medical Connectors
Sponsored by: Materion • Presented by: Mike Gideon on 07/09/20
Advanced Specimen Preparation for Metallography
Sponsored by: ASM International • Presented by: Larry Hanke & Dieter Scholtz on 07/07/20
New Capabilities in Metals Failure Analysis and Interface Characterization
Sponsored by: Thermo Fisher Scientific • Presented by: Herman Lemmens on 07/01/20
Chemical Micro Analyzer LIBS: Quick Element Analysis at Micrometer Scale
Sponsored by: Leica Microsystems • Presented by: Dr. Alessandra Forcucci on 06/30/20
How Failure Analysis is Impacted by Additive Manufacturing
Sponsored by: Knovel • Presented by: Dr. Daniel P. Dennies, FASM on 06/24/20
Grain Size: Then and Now
Sponsored by: Clemex • Presented by: Marc Lavelle on 06/23/20
How to Conduct Standard-Compliant Analysis of Non-Metallic Inclusions in Steel
Sponsored by: Leica Microsystems • Presented by: Dr. Alessandra Forcucci on 06/16/20
Advanced Software Features in Optical Emission Spectrometers (OES) for Foundry 4.0
Sponsored by: Hitachi High-Tech Analytical • Presented by: Wilhelm Sanders on 05/28/20
Advancements and Applications for Measuring Residual Stress via X-ray Diffraction
Sponsored by: Stresstech • Presented by: Wade Gubbels and James Thomas on 05/20/20
Introduction to the Metallurgy of Precipitation Hardening Stainless Steels
Sponsored by: Mager Scientific • Presented by: Dr. Daniel P. Dennies, FASM on 05/19/20
Making Challenging Edge Break Measurements Easy
Sponsored by: 4D Technology: An Onto Innovation Business • Presented by: Dr. Erik Novak and Kramer Lindell on 05/14/20
Vacuum for Your Industrial Process: Creating, Measuring, and Maintaining for Optimal Performance
Sponsored by: Agilent • Presented by: John McLaren and John Screech on 04/30/20
Introduction to the Metallurgy of Austenitic Stainless Steels
Sponsored by: Mager Scientific • Presented by: Dr. Daniel P. Dennies, FASM on 04/28/20
Take Your Multi-Modal Materials Characterization Further with the Latest Plasma FIB-SEM
Sponsored by: TESCAN • Presented by: Dean Miller, Ph.D. on 04/16/20
Maximize Member Benefits with the ASM Digital Library
Sponsored by: ASM International • Presented by: Nate Bulcroft on 04/02/20
Discovering Titanium’s Unique Properties by Examining Metallurgy and Microstructures
Sponsored by: Mager Scientific • Presented by: Dr. Daniel P. Dannies, FASM on 03/31/20
Metal Additive Manufacturing—3D Printing: Technologies, Opportunities, and Materials Testing
Sponsored by: Zwick/Roell • Presented by: Michael Goehring and Ajay Krishnan on 03/26/20
New Frontiers in Analytical Metallography
Sponsored by: ZEISS • Presented by: Andy Holwell on 03/19/20
2019 Webinars
Analysis of Welded Joint in High Volume Manufacturing
Sponsored by: Struers, Inc. • Presented by: Kelsey Torboli
Improving the Throughput of Volume Scan Diagnosis by 10X using Dynamic Partitioning
Sponsored by: Mentor, A Siemens Business • Presented by: Jayant D’Souza
Ensuring Fitness for Purpose of Additive Manufactured Parts using X-Ray Micro-CT
Sponsored by: Nikon • Presented by: Andrew Ramsey
Opportunities for Time-Resolved Dynamic CT Imaging in the Laboratory
Sponsored by: TESCAN, USA • Presented by: Luke Hunter
Engineering Your Dream Career: Becoming the Expert and the Boss
Sponsored by: ASM Women in Materials Engineering Committee • Presented by: Jacqueline Earle, Beth Snipes
Mechanical Testing Challenges in the Automotive Industry: Achieving Reliable Results
Sponsored by: Zwick/Roell • Presented by: Aleksander Koprivc and David Philips
Ensure 100% PMI without Incurring Significant Additional Costs
Sponsored by: Hitachi High-Tech Analytical Science • Presented by: Marianne Walters
Residual Stress Determination via X-ray Diffraction: A Tool for Control, Validation, and Development
Sponsored by: Stresstech • Presented by: James Thomas and Wade Gubbles
Xe+ PFIB Specimen Preparation for S/TEM Imaging
Sponsored by: TESCAN, USA • Presented by: Lucille A. Giannuzzi, Ph.D.
Nodularity Measurement Using Image Analysis and Its Correlation with Mechanical Properties of Ductile Iron
Sponsored by: Struers • Presented by: Henry Udomon
How Additive Manufacturing Affects Failure Analysis
Sponsored by: Mager Scientific • Presented by: Dr. Daniel P. Dennies, FASM
3D Materials Science and Mechanical Serial Sectioning for Microstructural Characterization
Sponsored by: UES, Inc. and Sandia National Laboratories • Presented by: Dr. Thomas Ivanoff
Advanced Powder Characterization for 3D Printing
Sponsored by: NSL Analytical • Presented by: Dr. Dave van der Wiel
Failure Analysis and Engineering Design Challenges of Additive Manufacturing
Sponsored by: Mager Scientific • Presented by: Dr. Daniel P. Dennies, FASM
Annealing Atmospheres: Key Control Variables & Gas Supply Systems
Sponsored by: Praxair Inc. & United Process Controls Inc. • Presented by: Steve Mueller and Eric Jossart
Sample Preparation Tips for Surface Hardened Gears
Sponsored by: Struers Inc. • Presented by: Kelsey Torboli
Using Automated Micrograph Analysis to Save Time and Costs
Sponsored by: MIPAR Software • Presented by: Dr. John Sosa
Identifying Organic Contaminants with Breakthrough Submicron IR and Simultaneous Raman Microscopy
Sponsored by: Photothermal Spectroscopy Corp. • Presented by: Dr. Mustafa Kansiz and Dr. Dennis Walls
Simple Solutions for Common Induction Heating Challenges: Lessons Learned
Sponsored by: Inductoheat • Presented by: Dr. Valery Rudnev, FASM, IFHTSE Fellow
2018 Webinars
How to Monitor Metalworking Fluids for Heat Treating and Other Applications
Sponsored by: Houghton International • Presented by: Jackie Walker and Chuck Faulkner
Best Practices for Leak Testing Large Vacuum Chambers
Sponsored by: Agilent Technologies • Presented by: John McLaren
New Tools to Accelerate Silicon Debug and Bring-Up
Sponsored by: Mentor, a Siemens Business and Teradyne Inc. • Presented by: Matthew Knowles and Marc Hutner
Fundamentals of Helium Leak Detection
Sponsored by: Agilent Technologies • Presented by: John McLaren
Understanding the Microstructure of Stainless Steel
Sponsored by: Stuers Inc. • Presented by: George Vander Voort
Improving Metal Additive Manufacturing with Integrated Materials Modeling
Sponsored by: Thermo-Calc Software • Presented by: Adam Hope
Using Automated SEM/EDS to Monitor Particulates for Automotive Component Cleanliness
Sponsored by: ThermoFisher Scientific • Presented by: Vishal Patel and Lev Pekarsky
Improving Your Vacuum Heat Treating with Industrial Gases and Process Control Systems
Sponsored by: Praxair and United Process Controls • Presented by: Patrick Diggins and Pat Torok
How to Measure Inclusions: Methods and Recommendations
Sponsored by: Struers Inc. • Presented by: George Vander Voort
Understanding Grain Size measurement
Sponsored by: Struers Inc. • Presented by: George Vander Voort